CMS5000 VOC Monitor

KNOW YOUR WATER

 

Clean water is essential for life. As more chemicals are introduced to the environment, adverse consequences to water quality and corresponding health impacts will increase as well. In order to provide the highest level of safety and security, a fast response to water quality issues is necessary.

The CMS5000 is a GC-based system that autonomously samples VOCs in water, quantifies contaminant levels and automatically alerts users if thresholds are exceeded.

Benefits

  • Saves labor and money with autonomous testing
  • Reduces frequency of regular outside lab analysis
  • Lowest cost of ownership
  • Less wasted time with limited maintenance and no sample prep
  • Easy integration and small footprint
  • Analyzes a wide range of EPA 8260 compounds
  • Ability to detect VOCs at very low levels (ppt)
  • Customized methods to suit your specific needs

Typical Applications

  • Drinking water distribution systems
  • Source water protection
  • Wastewater discharge compliance
  • Groundwater remediation
  • Air quality monitoring

Specifications

Type CMS5000
Physcial Operating Requirements  
Power Requirements Universal 110-240 V (ac), 200 Watts maximum
Size 16.9 x 32.7 x 10.2
Temperature 5 to 45
Relative Humidity 5 to 95%
Weight 55.1
Gas Chromatograph  
GC Column DB-1, 0.32 mm ID, 30 m, 4.0 μm df or equivalent
Heated Zones- Maximum Temperature- Valves °C 60
Heated Zones- Maximum Temperature- Column °C 225
Sample Inlet- Water Continuous Monitoring SituProbe (dynamic purge and trap)
Variable Column Pressure Control Regulator pre-set to 90 psi
Temperature Programmable Column Module °C 55 to 200
Carrier Gas Argon 99.999% @ 414-689 kPa (60-100 psi)
Valves Stainless Steel body / Telfon diaphragm
Sample Inlet- Air Air Sampling tube or direct plumb (<1 ATM)
Heated Zones- Maximum Temperature- Detector Oven °C 110
Concentrator Tri-Bed
Micro Argon Ionization Detector  
Dynamic Range 3 decades
Detection Limit ppb to ppt for most analytes
Repeatability 5 replicates of 1 ppb benzene: RSD calculated <5%
Temperature °C 5 to 45
Ionization Source Ni-63 2.4 mCi
Sensitivity in Water 0.5 ppb benzene in water s/n >200:1; 0.5 ppb MTBE in water s/n >15:1
Communication  
FTP Configurable for automated data upload
Storage 160 GB (minimum) hard drive
Touch Screen 6.5 in. VGA color display with touch screen
Wireless Connectivity 802.11 B/G
Integration
  • I/O Relay Contacts
  • USB for local diagnostics
  • TCP/IP based
  • Modbus over TCP/IP
System Status Status table for system operating changes
Computer / Data Internal Intel® Pentium® processor
Data Results Text file with compound retention times, quantitation, time/date for all targeted compounds including method parameters, and system status
Analysis & Protocols  
Data Analysis Automatic peak detection and integration for known compounds
Integrated Performance Standard Toluene Permeation Tube for check standard calibration
Detectable Compounds Volatile organic compounds (e.g. halogenated, aliphatic, and aromatic hydrocarbons)
Acceptance Protocol Initial setup with purge method

Accessories

CMS5000
Part Number Description
070-1223 10 μl Syringe, 6 pack
935-734-G1 Purge Tube Kit
935-375-P1 Sample Collection Tube
935-212-G1 Argon Fill Line
930-489-G14 Standard Column, 30 m, DB-1, 0.32mm id, 4.0 um
935-753-G1 Tri-Bed Concentrator
071-842 19 Compound VOC Mix
send to a friend